Thunderous bass, delicate high end with an open spacious and beautiful sound field. Available in wattages from 100 per channel to 500 per channel stereo, as well as an integrated and a multi-channel version of each amp.

Features

3 models of power amplifier
100 to 500 watts per channel
Little to no heat
Extremely low noise design
Gain Cell for each channel
High damping factor
Dual regulated independent power supplies
Dual Mono design
Analog power output stage
Unique locking binding posts

Benefits
Rock solid image
Deep bass
Open, spacious sound
Power doubles into 4 Ohm load
Will drive any loudspeaker
Effortless performance
Ultra low distortion

Thunderous bass, delicate high end with an open spacious and beautiful sound field. Available in wattages from 100 per channel to 500 per channel stereo, as well as an integrated and a multi-channel version of each amp.

Features
3 models of power amplifier
100 to 500 watts per channel
Little to no heat
Extremely low noise design
Gain Cell for each channel
High damping factor
Dual regulated independent power supplies
Dual Mono design
Analog power output stage
Unique locking binding posts

Benefits
Rock solid image
Deep bass
Open, spacious sound
Power doubles into 4 Ohm load
Will drive any loudspeaker
Effortless performance
Ultra low distortion

Thunderous bass, delicate high end with an open spacious and beautiful sound field. Available in wattages from 100 per channel to 500 per channel stereo, as well as an integrated and a multi-channel version of each amp.

Features
3 models of power amplifier
100 to 500 watts per channel
Little to no heat
Extremely low noise design
Gain Cell for each channel
High damping factor
Dual regulated independent power supplies
Dual Mono design
Analog power output stage
Unique locking binding posts

Benefits
Rock solid image
Deep bass
Open, spacious sound
Power doubles into 4 Ohm load
Will drive any loudspeaker
Effortless performance
Ultra low distortion

Actually a cleaner, simpler audio path than even separates, Control Amplifiers will become the standard by which even separates will soon be judged on.

Features
No preamp needed
3 models of Control Amplifier
HT Bypass
Polarity control
Far superior to an "integrated"
Variable gain amplifier
1/10th dB steps volume and balance
No internal volume/balance element
4 RCA inputs
1 XLR balanced input
Subwoofer outputs
Locking binding posts
Remote control included

Benefits
100 to 500 watts per channel
Purest audio path available
No interconnecting cables required
Accepts any source
Ultra low noise design
120dB range
Low distortion
Complete control over loudspeakers

Actually a cleaner, simpler audio path than even separates, Control Amplifiers will become the standard by which even separates will soon be judged on.

Features
No preamp needed
3 models of Control Amplifier
HT Bypass
Polarity control
Far superior to an "integrated"
Variable gain amplifier
1/10th dB steps volume and balance
No internal volume/balance element
4 RCA inputs
1 XLR balanced input
Subwoofer outputs
Locking binding posts
Remote control included

Benefits
100 to 500 watts per channel
Purest audio path available
No interconnecting cables required
Accepts any source
Ultra low noise design
120dB range
Low distortion
Complete control over loudspeakers

Actually a cleaner, simpler audio path than even separates, Control Amplifiers will become the standard by which even separates will soon be judged on.

Features
No preamp needed
3 models of Control Amplifier
HT Bypass
Polarity control
Far superior to an "integrated"
Variable gain amplifier
1/10th dB steps volume and balance
No internal volume/balance element
4 RCA inputs
1 XLR balanced input
Subwoofer outputs
Locking binding posts
Remote control included

Benefits
100 to 500 watts per channel
Purest audio path available
No interconnecting cables required
Accepts any source
Ultra low noise design
120dB range
Low distortion
Complete control over loudspeakers

The GCP 200 is “the finest preamplifier PS Audio have ever produced”. Dead quiet, low distortion, high input overload Gain Cell technology. Channels matched to within 1/10th of a dB.

This preamplifier sets the standard of all preamplifiers for its lack of a volume control or attenuator. The world's first such device that doesn't suffer the degradation of the traditional volume control or stepped attenuator.

Features
6 inputs
HT Bypass
Polarity control
5 RCA 1 XLR
Separate subwoofer output
XLR output and RCA output
Remote control
Programable gain for each channel
World's first preamp with no volume control degradation!
Gain Cell technology
Available GCPS power supply

Benefits
Shortest, purest signal path ever
Balanced design
Clean, absolutely dead quiet
Ultra low distortion
Finest sounding preamp in the history of the company

Sweet, open spacious and a joy to listen to, this device will bring the life back into your music. Connect to any CD or DVD player's output or connect to your computer. The DLIII will decode any stereo SPDIF output stream with 24 bit precision.

Features
Stereo D to A converter
Optical input
Coaxial input
USB input
24 bit DAC
Front panel select 192kHz
XLR and RCA outputs
192kHz upsample circuitry
8 times oversampling filter
Single stage IV converter
Discrete FET output stage

Benefits
Plays just about anything
Upsamples 44kHz to 192kHz
CD, DVD player or computer
Warmest sound DAC ever
Subterranean bass response
Sweet open top end
Fully balanced
Low noise
Output Impedance: RCA: 50 ohms, XLR: 100 ohms
Output Voltage: RCA: 2.75V XLR: 5.5 V

Accepts any cartridge, moving coil or moving magnet. Extremely low noise.

Features
Moving Coil
Moving Magnet
Front panel gain adjust
Mono
Stereo
Dual mono signal path
Balanced input to output
Phase reversal
Passive RIAA Curve
RIAA accuracy better than 1/10th dB
Impedance matching
Huge power supply
Gain Cell technology
Built in subsonic filter

Benefits
No better phono stage ever made
Accurate and musical
Low noise
Balanced input to output
Match your cartridge to the gain
Use as a standalone phono preamp
Direct into a power amp or preamp
Gain (unbalanced) - 42/48/54/60dB
Gain (balanced) - 48/54/60/66 dB
Loading - 100/500/1k/47k ohms
Output Impedance - 100 ohms
Dimensions - 8.5"w x 3"h 15.5"d

The GCHA is a fully balanced, class A power amplifier with a huge power supply designed to bring the ultimate experience from headphones from almost any source.

The GCHA will accept audio directly from your computer via its USB input or from any analogue source.

Features
Class A power amp
Drives any headphones
USB input
Analog inputs
Gain Cell driven
Front panel controls gain
Huge power supply

Benefits
High-end audio from headphones
Feed from your preamp
Feed from your computer
Open spacious sound
Low noise
Built in drivers for any computer
Dimensions - 8.5"w x 3"h x 15.5"d

Like the HCPS for the PCA-2 preamplifier, the GCPS provides a fuller, more open soundstage with far better slam and impact in the bottom end.

Features
Independent external power supply for GCP-200
Isolates the AC
80,000 mFd's of additional storage
Provides a pure DC source
Comes with connecting cables

Benefits
Opens the soundstage up
Lowers noise
Better bass
More open top end
Allows you to appreciate the GCP-200
Dimensions - 8.5"w x 3"h x 15.5"d

Based on cool running ICE technology, the Trio is a dual mono design with separate regulated power supplies. Ready to bi-amp at the click of a switch, the Trio can work wonders with any speakers and, because of its high input impedance, can be driven by even a tube preamp with no restrictions.

Features
Stereo high-end power amp
Balanced inputs
Single ended inputs
Continuous balanced operation
150 watts rms into 8 Ohms
300 watts rms into 4 Ohms
Dual mono with separate power supplies
High input impedance (50k)
Bi-amp switch on rear

Benefits
Low noise, balanced performance
Up to 300 watts per channel for music
Drives almost any loudspeaker
Perfect for tube preamps
Open, spacious sound
Real musical warmth
Powerful bass
Unrestricted soundstage
Easily bi-amps or drives entire system
Dimensions - 8.5"w x 3"h x 15.5"d

Based on Gain Cell technology for the gain control and ICE technology for the power amplifiers, this dual mono design is state of the art performing. Each mono power amplifier produces 100 watts into 8 Ohms and 200 watts into 4 Ohms, with peaks that reach 150 watts at the 8 Ohm level.

The C100 has 3 RCA single ended high level inputs, selectable by either the front panel selector buttons or the supplied remote control. While basic in features and functions the C100 provides a stunning performance for almost any connected loudspeaker and must be auditioned to enjoy the full benefits of the unit.

Features
200 watt mono amplifiers
Gain Cells
Remote Control
3 RCA inputs
Dual independant regulated supplies
Bi-amp output

Benefits
Complete Control Amplifier
Add a source and speakers
No attenuator in signal path
Simple, clean, awesome sounding
Drives nearly every loudspeaker

Based on PS Audio’s revolutionary new Gain Cell technology, the P200 preamplifier does not attenuate the incoming source signal and thus degrade it. Instead, inside the P200 is a unique variable gain amplification stage that allows the user to adjust the gain via the front panel control or the supplied remote control, without attenuating the signal. This is the cleanest and sonically superior method of controlling gain to your amplifier.

The P200 features three single ended RCA inputs and a balanced XLR and single ended RCA output to connect to your power amplifier. While basic design in terms of features the P-200 holds nothing back in terms of performance.

Features
Gain Cells
Remote Control
3 RCA inputs
XLR balanced output
RCA output
Large high current power supply

Benefits
No attenuator loss
Variable gain preamplifier
handles any source material
Basic, clean exceptional sounding
Inputs selectable from front panel
Inputs selectable from remote